| 主題 |
新制修訂標準編號 |
新標準名稱 |
Vocabulary, principles and common
elements of conformity assessment
符合性評鑑之詞彙、原則與共通性要素 |
ISO/IEC 17000：2004 |
Conformity assessment –Vocabulary and general
principles
符合性評鑑－詞彙和一般原則 |
ISO PAS 17001：2005
(Final Draft PAS approved, due to be published
by end of June 2005) |
Conformity assessment – Impartiality – Principles
and requirements
符合性評鑑－公正之原則和要求 |
| ISO PAS 17002：2004 |
Conformity assessment – Confidentiality – Principles
and requirements
符合性評鑑－機密之原則和要求 |
| ISO PAS 17003：2004 |
Conformity assessment – Complaints and appeals
– Principles and requirements
符合性評鑑－抱怨、申訴之原則和要求 |
ISO PAS 17004：2005
Final Draft PAS approved, due to be published
by end of June 2005 |
Conformity assessment – Disclosure and information
– Principles and requirements
符合性評鑑－公開資訊之原則和要求 |
ISO PAS 17005：2005
Final Draft PAS approved, due to be published
by end of June 2005 |
Conformity assessment – Use of management systems
in conformity assessment – Principles and requirements
符合性評鑑－管理系統在符合評鑑中之使用原則和要求 |
Code of Good Practice of conformity assessment
符合性評鑑良好作業規範 |
ISO/IEC Guide 60：2004
(CNS 14385：1994) |
Conformity assessment - Code of good practice
符合性評鑑－良好作業規範 |
| Writing specifications for use in conformity
assessment |
ISO/IEC Guide 7：1994
(CNS 14396) |
Guidelines for drafting of standards suitable
for use for conformity assessment
草擬符合性評鑑適用標準之指導綱要 |
Testing/calibration
測試/校正 |
ISO/IEC 17025 ：2005
(CNS 17025：1999) |
General requirement for the competence of testing
and calibration laboratories
測試與校正實驗室能力一般要求 |
ISO/IEC Guide 43-1：1997
Reconfirmed in 2002 |
Proficiency testing by interlaboratory comparisons
– Part 1：Development and operation of proficiency
testing schemes
實驗室間能力比較測試─第一部分：能力測試計畫的開發與運作 |
ISO/IEC Guide 43-2：1997
Reconfirmed in 2002 |
Proficiency testing by interlaboratory comparisons
–
Part 2：Selection and use of proficiency testing
schemes by laboratory accreditation bodies
實驗室間能力比較測試─第二部分：實驗室認證機構能力測試計畫的選擇與使用 |
Inspection
檢驗 |
ISO/IEC 17020：1998
(CNS 14725)
Reconfirmed in 2002 |
General criteria for the operation of various
types of bodies performing inspection
不同型式的執行檢驗機構運作之一般準則 |
Suppliers’ Declaration of conformity
(SDoC)
供應者的符合性聲明 |
ISO/IEC 17050-1：2004 |
Conformity assessment - Supplier’s declaration
of conformity – Part 1：General requirements
符合性評鑑－供應者的符合性聱明之一般要求 |
| ISO/IEC 17050-2：2004 |
Conformity assessment - Supplier’s declaration
of conformity – Part 2：Supporting documentation
符合性評鑑－供應者的符合性聲明之供應文件要求 |
Product certification
產品驗證 |
ISO/IEC Guide 23：1982
Reconfirmed in 2003 (CNS13221) |
Methods of indicating conformity with standards
for third - party certification systems
第三者驗證系統標示符合標準之方法 |
ISO/IEC Guide 28：2004
(CNS 13249：1982) |
Conformity assessment – Guidance on a third-party
certification system for products
符合性評鑑－第三者產品驗證系統之指引 |
ISO/IEC Guide 53：2005
(CNS 13293) |
An approach to the utilization of a supplier’s
quality system in third-part product certification
第三者產品驗證時使用供應者品質系統之方法 |
ISO/IEC Guide 65：1996
Reconfirmed in 2000
(CNS 13250) |
General requirements for bodies operating product
certification systems
執行產品驗證系統的機構之一般要求 |
| ISO/IEC Guide 67：2004 |
Fundamentals of product certification
產品驗證之基本規則 |
System certification
系統驗證 |
ISO/IEC 62：1996
(CNS 13285) |
General requirements for bodies operation assessment
and certification/registration of quality systems
執行品質系統評鑑與驗證/登錄的機構之一般要求 |
ISO/IEC Guide 66：1999
(CNS 14066) |
General requirement for bodies operating assessment
and certification/registration of environmental
management systems (EMS)
執行環境管理系統評鑑與驗證/登錄的機構之一般要求 |
Certification of persons
人員驗證 ISO/IEC
|
17024：2003
(CNS 14725：1998) |
General requirements for bodies operating certification
of persons
執行人員驗證機構之一般要求 |
Marks of conformity
符合性標誌 |
ISO Guide 27：1983
Reconfirmed in 2003
(CNS 13248) |
Guidelines for corrective action to be taken
by a certification body in the event of misuse
of its mark of conformity
錯用符合標誌時，驗證機構採取矯正措施之指導綱要 |
| ISO/IEC 17030：2003 |
General requirements for third-party marks of
conformity
第三者符合性標誌之一般要求 |
Accreditation
認證 |
ISO/IEC 17011：2004 |
Conformity assessment - General requirements
for accreditation bodies accrediting conformity
assessment bodies
符合性評鑑－認證機構提供符合性評鑑機構認證之一般要求 |
Mutual Recognition and Acceptance of conformity
assessment Results（MRAs)
相互承認與符合性評鑑結果之接受 |
ISO/IEC Guide 68：2002 |
Arrangements for the recognition and acceptance
of conformity assessment results
承認協議與符合性評鑑結果之接受 |
Peer assessment
同儕評鑑 |
ISO/IEC 17040：2005 |
Conformity assessment - General requirements
for peer assessment of conformity assessment bodies
and accreditation bodies
符合性評鑑－符合性評鑑機構和認證機構之同儕評鑑一般要求 |
